COMPILED ON: July 9, 2003 Includes item numbers for digikey.com where applicable. (Digikey is an electronics parts retailer) Please note this list is NOT exhuastive, it only lists the major components. PARTS FOR A/D BOARD: Prototyping board 923269-I(3M) 923269-ND $10.97 RS-232 Driver Chip MAX232EPE MAX232EPE-ND $3.98 A/D Converter Chip TLC1549IP 296-2894-5-ND $4.14 1.0 uF elect cap(Axial) 2222 021 38108(BC Components) 4062PHCT-ND (x5) $1.40 100 uF elect cap(Axial) ECA-1EHG101(Panasonic) P5540-ND $0.36 220 uF elect cap(Axial) ECA-1VM221(Panasonic) P5166-ND $0.41 470 uF elect cap(Axial) ECA-1CM471(Panasonic) P5141-ND $0.41 5V DC Votage Regulator N/A (1Amp - 100mAmp would suf) N/A $5.00(Aprox / Radioshack & overpriced) 9pin RS-232 connector Solder-type N/A $1.00(Aprox) 4pin Transducer Conect Any connector will do N/A $0.50(Aprox) Twisted pair wire Shielded(50ft) $12.00(Aprox) PARTS FOR LOAD CELL ASSEMBLY: Pressure Transducer MSP4102P2-ND MSP4102P2-ND $100.50 Pipe Fittings N/A N/A $2.00(Aprox) Brake Line N/A N/A $1.50(Aprox) PARTS FOR TEST STAND: 3/16" x 4" x 3 1/2' (x2) C-Channel for upper and lower rail 3/16" X 2" x 6" Fulcrum / support post 1/4" x 3" x 4" Fulcrum / support post - backbone support 1/8" x 1" x 3' (x2) Angle-iron stabalizer bars 1/8" x 4" x 1' Engine holder pipe 1/8" x 4" x 10" Engine holder pipe - base plate